Ships from Charlotte, NC
Ships within 24-48hrs
Secure Checkout
Tile a floor, hang cabinets, frame a wall, or lay out a room — the WorCraft 20V 12-Line Green Laser Level gives you bright, accurate reference lines around the entire space in seconds. Twelve green laser lines across three 360° planes auto-level in under 3 seconds, and pulse mode with the included detector extends the working range to 50 m (164 ft) for outdoor and bright-light conditions. Powered by the WorCraft 20V ONE FOR ALL battery — no disposable cells required.
Built for Layout and Install
Three 360° planes project 12 green lines for full-room level and plumb references. Auto-leveling gets you accurate in under 3 seconds, and a lockable line mode holds alignment at any angle for non-level applications. Separate control of vertical and horizontal lines lets you show only what you need. Green beams are significantly easier to see than red — visible up to 30 m (98 ft) by eye, and up to 50 m (164 ft) with the included laser detector in pulse mode.
Versatile Mounting
A multi-axis adjustable clamp with a magnetic metal mount attaches to brackets, tracks, and steel surfaces. Two tripod thread holes on the base (1/4 in and 5/8 in) fit standard mounts, and the included heavy-duty magnetic bracket and metal-sheet clamp cover most jobsite setups out of the box.
What’s in the Set
- WorCraft 20V 12-Line Green Laser Level
- Heavy-duty magnetic bracket (PV14, 360° pivoting adjustable base)
- Metal-sheet clamp (PV6+, adjustable depth)
- Tripod
- Magnetic laser target
- Green viewing glasses
- Laser detector
- WorCraft 20V 2.0Ah ONE FOR ALL battery
- 1.5A charger
- Stackable XCUBE case
- Instruction manual
Specifications
- Laser: 3 × 360° green beam (12-line), 520 nm OSRAM diode
- Laser class: Class II, <1 mW
- Accuracy: ±3 mm at 10 m (horizontal and vertical lines)
- Self-leveling range: ±4°
- Leveling time: ≤3 seconds
- Working range: 30 m (98 ft) by eye; up to 50 m (164 ft) with laser detector
- Mounting threads: 1/4 in (6.35 mm) and 5/8 in (15.87 mm)
- Protection rating: IP54 (dust and splash resistant)
- Operating temperature: 14°F to 122°F (-10°C to 50°C)
- Power: WorCraft 20V ONE FOR ALL battery (2.0Ah included)
Frequently Asked Questions
Q: Does the laser level come with a battery?
Yes — the set includes a WorCraft 20V 2.0Ah ONE FOR ALL battery and a 1.5A charger, plus a laser detector, protective glasses, tripod, and stackable case. Ready to use out of the box.
Q: Can I use it outdoors or in bright conditions?
Yes — pulse mode works with the included laser detector to pick up the beam over longer distances and in bright or outdoor conditions where the line is hard to see by eye. Working range extends to 50 m (164 ft) in pulse mode.
Q: Can I use it with other WorCraft 20V batteries?
Yes — it runs on any WorCraft 20V ONE FOR ALL battery, including the 4.0Ah pack for extended runtime on long layout sessions.
Works Well With
Extend runtime and pair with other WorCraft 20V ONE FOR ALL tools for a complete layout and install setup.
- WorCraft 20V 4.0Ah Battery — ONE FOR ALL, USB-C Output — upgrade from the included 2.0Ah for extended runtime on long layout sessions, plus USB-C output to charge your phone on the job.
- WorCraft 20V 2.0Ah Battery Pack — ONE FOR ALL — keep a spare 2.0Ah on hand so the level is always ready.
- WorCraft 20V Battery Charger — 2.4A, ONE FOR ALL — faster 2.4A charging to complement the included 1.5A charger.
- WorCraft 20V Brushless Hammer Drill — drill anchor points and fasteners once your layout lines are set.
- WorCraft 20V Cordless Sliding Miter Saw — 7-1/4 in, Tool Only — cut framing and trim to length after laying out with the laser level.